Standard Security products and Prison Doors
- HMP standard cell doors, prison doors and safe cell doors
- HMP Dirty protest cell doors and disabled cell doors
- HMP Control and restraint doors - manual locking
- HMP Control and restraint doors - electric locking
- HMP bullet proof glazed doors
- HMP Hinged grille gates and security screens
- HMP 12 hour security window grilles
- HMP 24 hour high security window grilles
- HMP Fixed roof grilles and roof lights
- HMP Sliding roof grilles and solid hatches with manual locking
- Security counters with document transfer and speech transfer units
- Security windows, bullet proof glass or anti bandit glass
- Full height glazed screens - bullet proof and anti bandit
- Stainless steel key chutes
- High security steel doors and Z doors
The use of this security steelwork is not restricted solely to prison or detention facilities, with locking variations these security products can be used on any structure requiring a high security presence, safe in the knowledge the these products are used on some of the most secure facilities in the UK.
Prison doors and Cell doors
Steel door and frame assembly of composite construction, internal structural matrix with insulated core, 2mm CR4 steel plates to both faces and full length tubular hinge assembly, the door skins wrap around the matrix assembly, are fully welded and then dressed flush. Viewing windows with flaps, food hatch s, inundation points and anti barricade facility can all be built into the door leaf with bespoke locks to suit the clients requirements. The door sets are manufactured to the standard prison sizes or as site measured units to suit existing openings. Mid level or low level shackle hatches can be included for overseas facilities.
High Security Doors C & R (control and restraint)
Steel door and frame assembly of composite construction, internal structural matrix with insulated core, 2mm CR4 steel plates to both faces and full length tubular hinge assembly, the door skins wrap around the matrix assembly, are fully welded and then dressed flush. Viewing windows are available with anti bandit or bullet proof glazing complete with anti barricade facility built into the door leaf and door seals for external applications
The door is suitable for manual or electric locking and to be specified during construction , These doors are manufactured as an integral part of Defence Doors Ltd glazed security partitions in standard sizes or bespoke stand alone units to suit existing structural openings
Secure partitions, air tight rooms, glazed security screens and interlocks
Full height security screens and panels, a universal and infinite walling system designed with mid rails and intermediate posts to allow the installation of optional panels including lexan marguard, steel mesh, steel plate, glazed panels or a combination of all materials.
Glazing options include 11.5mm anti bandit glass or 36mm bullet proof, steel panels available from 3mm plate through to 12mm steel plate and mesh panels to any standard stock product.
The walling system will span from existing floor level to the under side of the existing ceiling level, it has been designed to incorporate cell doors and security doors, counters, transfer units and key chutes within the structure.
Utilizing an intermediate post as a corner post it returns the walling system through 90 degrees, repeated corners then generate free standing cells or "secure rooms within existing rooms" and options of an independent roof.
If the system is erected between two existing walls it creates a secure dividing barrier with or without secure door entry, a combination of panels and doors will create a secure 2 way double interlock facility with out the need for builders work.
The system has an infinite number of applications including search areas, safe rooms, interview rooms, bolt holes, secure rooms, dividing walls either partially or full glazed, as all panels are manufactured flat pack off site and installed with little more than bolt connections and on site drilling and the disruption is reduced to an absolute minimum generally with no builders work required.
Generally the system is produced in mild steel but is available in stainless steel for pharmaceutical and chemical applications and the introduction of air tight doors will allow the construction of air tight and gas tight chambers, fumigation suites and air tight glazed interlocks.
Grille gates
Single or double grille gate assemblies, produced to the current HMP Home Office standards complete with an integral lock case welded into the matrix with a lock type to client s specification.
The gate is manufactured as an independent free standing structure cast onto the floor or as a face fixed frame with options of manual or electric locking . The gate matrix consists of 30mm diameter solid round vertical bars at 150mm centres passing through 65x12 horizontal flats at 450mm centres, a fully welded construction with standard HMP pivot assemblies.
Sliding security hatches
Sliding security grille or double skinned insulated panel assembly mounted on 4 inch diameter nylons wheels for maintenance free running, the hatch assembly tracks are pressed from steel plate to form guide rails, stop bars and the locking plate. The sliding hatch incorporates a Chubb lock case for a sliding grille grab latch lock assembly or simple padlock facility. Optional finish in painted steel or hot dipped galvanized steel
|
